|
|
Post by Wolfen on Apr 2, 2012 4:48:08 GMT -5
Alright so i've decided that i want a pistol barrel for my t9.1 sniper but it seems to be impossible to find anyone anywhere (since flasc is out of stock still with no definitive info on when they're getting more)
My preference would be a Flasc 8" with a .687 back, but i will consider any and ALL pistol barrels.
You have to be able to ship to Finland (which doesn't actually cost that much) and i do not have any problems paying first if it's a trusted seller.
Send me a PM if any of you have any spare pistol barrels you would be willing to part with.
|
|
|
|
Post by Wolfen on Apr 29, 2012 5:07:02 GMT -5
still looking for a pistol barrel.
|
|
|
|
Post by skullcandy1993 on Apr 29, 2012 9:55:41 GMT -5
why not just order one from rockstar?
|
|
|
|
Post by chicago on Apr 29, 2012 11:24:14 GMT -5
Godzhate over on the Tib forum bought a pistol barrel from Lapco his was #3 out of 50 in a special run. It is the same bore as the riffled T9.1, 0.683 barrel (everything but the length). I understand you can get the business end tip in either long or short threading (like the lapco fake suppressor will easily fit as opposed to the depth of the T9 threading which is shorter). He put a M50 hammerhead on his if I'm not mistaken.
So, i was going to call Lapco (finally got their number) when I realized I wanted to put one of these babies in my MP7 not just on my pistols. So, I went to hammerhead's site to get the OD of the M50 (Which is 1.25 inches which would just fit if everything was perfectly aligned); but, as luck would have it, their site was down! My luck of course.
So, I went to Rockstartactical.com and checked on the M50 they were in stock, the cost, and the size I thought they were (length to btw is 5 inches) for around $35 US. And, almost right below it was the 8.5 inch 0.688 riffled hammerhead barrel . So, I purchased it with the M50 muzzle, the total cost was $103.00 US shipped. Should come Wednesday or Thursday of this week. Figured I saved a ton on it vs. Separate purchases of muzzle and barrel and shipping etc. Enough so that the unknown hammer barrel was under $50 and worth the test.
I don't know about you guys but, I've seen literally nothing on either of the barrel I've highlighted here. Nothing positive but nothing negative either. I now own a db meter as well as good ears so I'll be able to tell you quickly if the hammerhead m50 muzzle is anywhere close to what its cracked up to be. I hope it silences the report somewhat. I'll also let you know how accurate and efficient the barrel is compared to my 0.687 flasc and the Tib/Lapco 0.683 (which still occasionally slices First Strikes!)
That was a long way of saying that I put off buying two of the special lapco riffled pistol run and puttin on two M50 tips until I test the M50 separately. I'll aslo then have every possible combination of pistol barrels to try. So, I did not flow my whim and buy two special run lapcos for probably around $300 US.
I talked to Dave over at FLASC, that's a separate "long story." Sad and out of his control, that inventory problem. If you'd like I can pm you about it.
Sorry, gotta go, time for my Sunday sponge bath with the girls....lot more room around here since the alpaca blew up! Oh, and Betty White backed her bags and left last night. So, I'm actually looking forward to my sponge bath.
[Girls, where's my Viagra?]
|
|
|
|
Post by Wolfen on Apr 29, 2012 12:50:57 GMT -5
I can't order from rockstar because they don't ship here.
|
|
