|
Post by syko89 on Aug 10, 2013 9:15:40 GMT -5
I bought this of the AO forums with the intention of doing a box mag type feed. www.automags.org/forums/showthread.php?265214-WL-Automag-project&p=2833484 but already having a emag and building a double barrel mag I have enough in the way of rate of fire so decided to do a mag fed marker and then thought why no a fs platform. I sent the ULE body to Xmag Terror after talking to him about it to get the feed port milled out and a new feedneck built to run the fs rounds. got it back very quickly for the mag feed I decided on the mkv dmag upgrade kit. I am honestly surprised this is no done more with these kits. with that mounted got the rest of the stuff together and just had to bolt them on once I do some accuracy test and make sure the shroud is sturdy enough I will clean up the brace for the magwell and paint it to match. feeds great fs and regular paintball just with fs round you want to hand load 2 round to fill the chamber and part of the feed neck so when the mag open they stay pointed in the correct direction. shooting at a sheet I would re use the fs rounds and I was pleasantly surprised the they had no fin damage from the bolt as I knew this was a issue for so other semi auto fs markers
|
|
|
Post by wingbatwu on Aug 10, 2013 12:57:12 GMT -5
I love it!
|
|
|
Post by Allu on Aug 21, 2013 12:11:13 GMT -5
Words that pop to mind "Stengun Sniper"
|
|
|
Post by syko89 on Aug 22, 2013 16:48:59 GMT -5
Unfortunately the shroud is not going to work. I have rebuilt it with out the shroud. Main problem was that the shroud was angled so at max with the fsr riser I was at about 50yrd and that won't work and the body flexed to much so It would twist when using the bipod. I am just waiting on a new sight rail as current setup is way too high to mount the mag feed back on.
|
|
|
Post by syko89 on Aug 22, 2013 16:49:26 GMT -5
|
|
|
Post by syko89 on Aug 28, 2013 17:18:49 GMT -5
Well initial testing has revealed that the hp Automag valve over powers the flasc suppressor. It does help but not too the point I would like. At 60yrds I put 10 fs rounds on a power line pole with a 14 in vertical spread. Going to setup a classic valve for a lvl10 as they are known for being more consistent
|
|