Empire Trracer air/stock set up

[savage]

Looking for advice on how to best set up my empire trracer. I have a ninja 13ci tank screwed in the back right now and the 1 inch riser i have below the tiberius scope works ok for seeing thru the scope but could be better. Options im looking at are:
1. Put a 5 degree mount on the grip and use a phantom L-stock and keep the tank where it is.
2. 5 degree mount with L-stock but run a remote line.
3. 5 degree mount with L-stock and camo tape/clamp the 13ci tank to the stock and run a short hose line to the asa.
4. Get an APR2 and hope it adds enough clearance vs the 1 inch riser i have.*note- i havnt added the hha optimizer yet(arriving monday) and that may add just enough more height to fix it altogether.

Anyother stock options beyond the phantom L-stock? I saw a lapco with asa but i dont think it would work well. Remember the asa is angled on the empire trracer so anything 'normal' will have tilt, thats why im leaning towards having the stock mount to the grip instead.

Thanks

[lordkyleofearth]

I don't have any images of it on my Phantom, but I use a cheap gas-through stock with a modified butt-piece.

The new back drops my shoulder contact point by a couple of inches and allows me to use my optics without mask interference.

I have a bottom line installed on my Phantom, so I flip it over when when I'm using it on that marker to raise the shoulder contact point (to mid marker). You could make similar adaptations to the butt to optimize contact positioning on your trracer.


That was the original stock configuration.