|
|
Post by DJmatt123 on Feb 17, 2013 23:16:55 GMT -5
Ok, so I love my Nelson Anarchy but it seems to be a little to brittle to use with the q-loader setup so until Dye comes out with their "rotor box mag", I'm looking for the best replacement paintballs which are accurate and not quite as brittle as the Nelson but will still usually break on target since the first shot counts. I'm looking for balls that are nice and round with as little seam as possible. I would prefer a dark shell with a bright fill. Any suggestions?
|
|
|
|
Post by Allu on Feb 18, 2013 6:14:55 GMT -5
slimeballs seems to bounce a lot so I wouldn't recommend those, Formula 13 are somwhere along those lines as i remember but there are probably balls better suited out there... cant come to think of any others at the moment, been a while since I got myself some rough paint... Wolfen give us a hand here  |
|
|
|
Post by White Feather on Feb 18, 2013 10:34:11 GMT -5
Honestly, as far a breakage and brittleness are concerned I don't think you can go wrong with some Valken Graffiti. For the money, they are a pretty good ball in m experience. Next after that is Valken Redemption. It may be a bit more brittle than the Graffiti but I am not sure how well it will stand he pressure in your Q-Loader. If it were me, I'd go with the Graffiti.
|
|
|
|
Post by Wolfen on Feb 18, 2013 11:18:13 GMT -5
My suggestion would be Marbellizers (not ultra marbs just regular ones), Draxxus Blaze or RPS Premiums. All of these are very well made, Almost always breaks but have a weebit tougher shell so that they can handle Q-loaders, no low-force bolters and foliage in the woods.
|
|
|
|
Post by avengingangel on Feb 18, 2013 17:06:48 GMT -5
Wolfen speaks!
|
|
|
|
Post by DJmatt123 on Feb 19, 2013 22:46:10 GMT -5
Cool, thanks for the input! I'm going to be down by ANS gear this week for work and they sell them in 100 round bags so I'm going to pick up a bunch of bags and start some testing....
|
|
|
|
Post by ruraldawgs on Feb 20, 2013 11:28:31 GMT -5
I use Empire Premium and they seem to work great in high pressure markers (tippmans, et al...). They also shoot through brush pretty well and are sized consistently for my Lapco 687 barrel.
|
|
