Milsig FS rifled barrel

[DJmatt123]

Just got my Milsig FS rifled barrel in the mail. It is for the T8 or T9 and comes with ball detents. It looks well made, just a simple plastic sleeve that it came in but they used a huge box to ship it in. I plan on cutting it down for use in my T8 (so my Flasc that I just got and cut down will probably be for sale soon). I'm going to try it out before I cut it and after just to see if I can tell any major difference. I know I'll be removing all the porting that it has. I tried to screw on the Tiberius mock suppressor and it did not fit, not sure what kind of threads are on the end of the barrel. I took some pics of it and the rifling for everyone, hopefully this will work for everyone with a T8 or T9 that wants a rifled barrel since Lapco only makes them for the T8.1 or the T9.1. It says it is a .689 bore.

[DJmatt123]

Just a quick test before it got dark....
6 shots
20 yards (that's as long as my side yard is)
T-8 with full barrel (not cut down yet) and red dot, off hand....

1 broke in barrel
1 off about 7" horozantal
3 within 4" group
1 a little high but very close in the group horozantally also

Aiming at the circle on the box

[DJmatt123]

I tried out a couple of other things. I found that the Milsig barrel is a little larger than the Flasc T-8 FS barrel. The rifling does seem to engage the FS round. I placed a line on the back of the round and dropped it through both the Flasc and the Milsig barrels. The round went straight down the Flasc and it rotated about 1/4" in the Milsig (cut down so it's only about 7" long).